Home > global semiconductor industry, global semiconductor market, optical networking, OTN, PMC, ROADM, Semiconductors > PMC’s DIGI 120G supports 10G, 40G and 100G speeds for OTN transport

PMC’s DIGI 120G supports 10G, 40G and 100G speeds for OTN transport

March 18, 2013

PMC-Sierra Inc. has launched the PM5440 DIGI 120G, said to be the industry’s only single-chip OTN processor supporting 10G, 40G and 100G speeds for OTN transport.

Elaborating, Kevin So, senior product line manager, PMC, said: “PMC is the first to integrate support for 12x10G, 3x40G or 1x100G in a single piece of silicon to address OTN transport (point-to-point), OTN aggregation (multiplexing) and OTN switching deployments. For example, with DIGI 120G, an OEM can design a line card on a P-OTP that supports 12x10G supporting per port configurable multi-service like OC-192/STM-64, 10GE, OTU2 or Fiber Channel.”

Using the same chip and same software investment, they can also design a 3x40G card supporting 40GE, OC-768/STM-256 or OTU3. Another card can be designed to support 100GE or OTU4. An OEM can design 10+ cards across multiple platforms leveraging a single R&D investment using DIGI 120G. This also translates into the lowest cost of ownership for the OEMs, while achieving a time to market advantage.

How does OTN allow for flexible aggregation and switching from 1G to 100G? For that matter, what can this device do?

OTN is a defined as a carrier grade protocol to transparently carry and switch and aggregate multi-service traffic including 1GE all the way to 100GE over a WDM. The protocol is an ITU-T standard, and supports ODU0 (which is 1G) to ODU4 (which is 100G). In addition, OTN defines something called ODUflex, which is a flexible container that can be adjusted up and down from 1G to 100G in increments of 1G.

PMC’s DIGI 120G supports all these OTN container rates and enable the ability to multiplex and switch traffic between them. In addition, DIGI 120G provides the ability to scale ODUflex to carry packet traffic ranging from 1G to 100G without service interruption. DIGI 120G is a single chip solution that uniquely enables the transponders, muxponders and line cards on ROADMs and P-OTPs.

What are the innovations done by the PM5440 DIGI 120G? What if there is some new chip coming out?

Reducing line card power and bill-of-material by more than 50 percent, PMC’s DIGI 120G stands uniquely differentiated as:
* Industry’s only single-chip solution delivering 12x10G, 3x40G or 1x100G port densities.
* Industry’s highest number of 10G ports enabling 2x higher density 10G OTN line cards.
* Industry’s highest gain 40G/100G enhanced-FEC extending optical reach by 2x vs GFEC.
* Industry’s only 120G OTN solution with OIF’s OTN-over-Packet Fabric Protocol (OFP).
* First OTN processor to enable hitless packet traffic scaling with ITU-T’s G.hao/G.7044.
* Flexible per port client-mapping of OTN, Ethernet, Storage, IP/MPLS and SONET/SDH.
* Synchronous Ethernet (SyncE), 1588v2 Precision Time Protocol (PTP), and Ethernet Link OAM (802.3ah) delivering per port Carrier Ethernet performance.

To deliver these innovations, PMC integrated well over a billion transistors. The level of silicon integration is unprecedented – requiring engineering capabilities unmatched in the telecom industry. So added that PMC worked closely with tier-1 OEM customers from the start at the requirements phase in order to tailor the solution for their systems. As a result, the DIGI 120G is a key architectural element of their system.

By when does PMC sees enterprises ‘really’ going in for products with PM5440 DIGI 120G, to support Big Data? And, what happens if they still don’t?

So noted: “We have been working with our customers for the last few months developing their line cards using DIGI 120G. We are confident they will take their products using DIGI 120G to production in 2013.”

ROADM revolution
Does PMC actually see a reconfigurable optical add-drop multiplexer (ROADM) revolution?

According to So, a couple of things are happening in the ROADM market. On the photonics side, products are now available to allow service providers to deploy very flexible wavelength switches that are color independent, direction independent, wavelength contention-free and support flexible ITU grid widths.

On the platform architecture side, we are seeing a move away from traditional muxponders and transponders line card architectures where the client ports are fixed to a specific optical uplink port (wavelength). Instead, OEMs want to de-couple the client ports from the uplink optical capacity for great flexibility and in order to achieve better bandwidth utilization especially as the industry starts deploying 100G wavelengths.

Services in the network, especially those from the metro network edge is still largely 1G or 10G rates. To achieve this flexibility, central fabrics are added to the ROADM platform to support OTN switching. PMC’s Metro OTN processor family, including our latest DIGI 120G, enable OEMs to build line cards that can switch OTN and packet simultaneously in these platform architectures.

Finaly, is the bandwidth of common modulation format for 100G and beyond too broad for ROADMs?

Kevin So concluded: “OTN, as a protocol, is designed to scale to beyond 100G. The standard bodies are already working on this now. ROADMs, as a hardware platform will scale, but new components and technologies will likely be needed to take them beyond 100G.”

Advertisements
  1. Emily
    March 25, 2013 at 5:11 pm

    Hello! This post could not be written any better! Reading this post reminds me of my good old room mate! He always kept chatting about this. I will forward this page to him. Pretty sure he will have a good read. Many thanks for sharing!

  2. Magnetite
    March 26, 2013 at 12:03 am

    I really like your blog.. very nice colors & theme. Did you create this website yourself or did you hire someone to do it for you? Please answer back as I’m looking to create my own blog and would like to find out where you got this from. Thanks a lot

  3. Dobry
    April 6, 2013 at 9:21 am

    Super-duper blog! I am loving it!! Will come back again. I am bookmarking your feeds also.

  4. Garve
    April 9, 2013 at 1:32 am

    Thank you to get a really good article — to offer back again just a little, here’s the quotation from my top 100: 95. Great feelings talk and then the innovative thoughts, however good steps converse with many mankind. — Theodore Roosevelt

  1. No trackbacks yet.
Comments are closed.
%d bloggers like this: