Archive

Archive for July, 2014

SEMI materials outlook: Semicon West 2014


Source: SEMI, USA.

Source: SEMI, USA.

At the recently held Semicon West 2014, Daniel P. Tracy, senior director, Industry Research and Statistics, SEMI, presented on SEMI Materials Outlook. He estimated that semiconductor materials will see unit growth of 6 percent or more. There may be low revenue growth in a large number of segments due to the pricing pressures and change in material.

For semiconductor eequipment, he estimated ~20 percent growth this year, following two years of spending decline. It is currently estimated at ~11 percent spending growth in 2015.

Overall, the year to date estimate is positive growth vs. same period 2013, for units and materials shipments, and for equipment billings.

For equipment outlook, it is pointing to ~18 percent growth in equipment for 2014. Total equipment orders are up ~17 percent year-to-date.

For wafer fab materials outlook, the silicon area monthly shipments are at an all-time high for the moment. Lithography process chemicals saw -7 percent sales decline in 2013. The 2014 outlook is downward pressure on ASPs for some chemicals. 193nm resists are approaching $600 million. ARC has been growing 5-7 percent, respectively.

For packaging materials, the Flip Chip growth drivers are a flip chip growth of ~25 percent from 2012 to 2017 in units. There are trends toward copper pillar and micro bumps for TSV. Future flip chip growth in wireless products are driven by form factor and performance. BB and AP processors are also moving to flip chip.

There has been growth in WLP shipments. Major applications for WLP are driven by mobile products such as smartphones and tablets. It should grow at a CAGR of ~11 percent in units (2012-2017).

Solder balls were $280 million market in 2013. Shipments of lead-free solder balls continues to increase. Underfillls were $208 million in 2013. It includes underfills for flip chip and packages. The increased use of underfills for CSPs and WLPs are likely to pass the drop test in high-end mobile devices.

Wafer-level dielectrics were $94 million market in 2013. Materials and structures are likely to enhance board-level reliability performance.

Die-attach materials has over a dozen suppliers. Hitachi Chemical and Henkel account for major share of total die attach market. New players are continuing to emerge in China and Korea. Stacked-die CSP package applications have been increasing. Industry acceptance of film (flow)-over-wire (FOW) and dicing die attach film (DDF) technologies are also happening.

 

Semicon West 2014: SEMI World Fab forecast report

July 14, 2014 Comments off

Fabs

Fabs

Christian Gregor Dieseldorff, senior analyst, Industry Research & Statistics  Group at SEMI, presented the SEMI World Fab Forecast at the recently held Semicon West 2014, as part of the SEMI/Gartner Market Symposium on July 7.

Scenarios of fab equipment spending over time has been  20-25 percent in 2014, and 10-15 percent in 2015. At this time, worldwide fab equipment spending is about same in 1H14 vs 2H14. As for fab construction projects, 2013 was a record year with over $9 billion.

New fabs: construction spending (front end cleanrooms only!)
2013: record year with over $9 billion.
2014: -22 percent to -27 percent (~$6.6 billion)
2015: -22 percent to -30 percent (~$5 billion +/-).

Fab equipment spending front end (new and used)
2014: 20 percent to 25 percent (~$35 billion to $36 billion) – if $35 billion, then third largest on record.
2015: 10 percent to 15 percent (~$40 billion) – if $40 billion, then largest in record.

Installed capacity for front end fabs (without discretes)
2014: 2 to 3 percent
2015: 3 to 4 percent
Future outlook beyond 2015: less than 4 percent.

SEMI World Fab Forecast report status and activity outlined that there were 1,148 front end facilities (R&D to HVM) active and future. Also,
* There are 507 companies (R&D to HVM).
* Including 249 LEDs and Opto facilities active and future.
* There are 60 future facilities starting HVM in 2014 or later.
* Major investments (construction projects and/or equipping): 202 facilities in 2014, 189 facilities in 2015.

A slow down of fab closures is expected from 2015 to 2018 for 200mm fabs and 150mm fabs.

Semiconductor capital spending outlook 2013-18: Gartner

July 11, 2014 Comments off

At Semicon West 2014, Bob Johnson, VP Research, Gartner, presented the Semiconductor Capital Spending Outlook at the SEMI/Gartner Market Symposium on July 7.

First, a look at the semiconductor revenue forecast: it is likely to grow at a 4.3 percent CAGR from 2013-2018. Logic continues to dominate, but growth falters. As per the 2013-2018 CAGRs, logic will be growing 3.5 percent, memory at 4.5 percent, and other at 6.3 percent.

Bob Johnson

Bob Johnson

As for the memory forecast, NAND should surpass DRAM. At 2013-2018 CAGRs, DRAM should grow -1.1 percent, while NAND should grow 10.8 percent. Smartphone, SSD and Ultramobile are the applications driving growth through 2018. SSDs are powering the NAND market.

Among ultramobiles, tablets should dominate through 2018. They should also take share from PCs. Next, smartphones have been dominating mobile phones.

Looking at the critical markets for capital investment, smartphones are the largest growth segment, but have been showing signs of saturation. The revenue growth could slow dramatically by 2018. Ultramobiles have the highest overall CAGR, but at the expense of PC market. Tablets are driving down semiconductor content. Desktop and notebook PCs are a large, but declining market. This also requires critical revenue to fund logic capex. Lastly, SSDs are driving NAND Flash growth. The move to data centers is driving sustainable growth.

In capital spending, memory is strong, but logic is weak through 2018. The 2014 spending is up 7.1 percent, driven by strong memory market. Strength in NAND spending will drive future growth. Note that memory oversupply in 2016 can create next cycle. NAND is the capex growth driver in memory spending.

The major semiconductor markets, which justify investment in logic leading edge capacity, are now running out of gas. Ultramobiles are cannibalizing PCs, smartphones are saturating and both are moving to lower cost alternatives. It is increasingly difficult to manufacture complex SoCs successfully at the absolute leading edge. Moore’s Law is slowing down, while costs are going up. Breakthrough technologies (i.e., EUV) are not ready when needed. Much of the intelligence of future applications is moving to the cloud. The data centers’ needs for fast, low power storage solutions are creating sustainable growth for NAND Flash.

The traditional two-year per node pace of Moore’s Law will continue to slow down. Only a few high volume/high performance applications will be able to justify the costs of 20nm and beyond. Whether this will require new or upgraded capacity is uncertain. 28nm will be a long lived node as mid-range mobility products demand higher levels of performance. Finally, the cloud will continue to grow in size and influence creating demand for new NAND Flash capacity and technology.

Categories: Semiconductors

How Intel competes on today’s fabless ecosystem?


The SEMI/Gartner Market Symposium was held Semicon West 2014 at San Francisco, on July 7. Am grateful to Ms. Becky Tonnesen, Gartner, and Ms Agnes Cobar, SEMI, for providing me the presentations. Thanks are also due to Ms Deborah Geiger, SEMI.

Dean Freeman, research VP, Gartner, outlined the speakers:

• Sunit Rikhi, VP, Technology and Manufacturing Group, GM, Intel Custom Foundry Intel, presented on Competing in today’s Fabless Ecosystem.

• Bob Johnson, VP Research, Gartner, presented the Semiconductor Capital Spending Outlook.

• Christian Gregor Dieseldorff, director Market Research, SEMI, presented the SEMI World Fab Forecast: Analysis and Forecast for Fab Spending, Capacity and Technology.

• Sam Wang, VP Research Analyst, Gartner, presented on How Foundries will Compete in a 3D World.

• Jim Walker, VP Research, Gartner, presented on Foundry versus SATS: The Battle for 3D and Wafer Level Supremacy.

• Dr. Dan Tracy, senior director, Industry Research & Statistics, SEMI, presented on Semiconductor Materials Market Outlook.

Let’s start with Sunit Rikhi at Intel.

As a new player in the fabless eco-system, Intel focuses on:
* The value it brings to the table.
* How it delivers on platforms of capability and services.
* How it leverage the advantages of being inside the world’s leading Integrated Device Manufacturer (IDM)
* How it face the challenges of being inside the world’s leading IDM.

Intel sunit-rikhiIntel has leadership in silicon technologies. Transistor performance per watt is the critical enabler for all. Density improvements offset wafer cost trends. Intel currently has ~3.5-year lead in introducing revolutionary transistor technologies.

In foundry capabilities and services platforms, Intel brings differentiated value on industry standard platforms. 22nm was started in 2011, while 14nm was started in 2013. 10nm will be starting in 2015. To date, 125 prototype designs have been processed.

Intel offers broad capability and services on industry standard platforms. It also has fuller array of co-optimized end-to-end services. As for the packaging technology, Intel has been building better products through
multi-component integration. Intel has also been starting high on the yield learning curve.

Regarding IDM challenges, such as high-mix-low-volume configuration, Intel has been doing configuration optimization in tooling and set-up. It has also been separating priority and planning process for customers. Intel has been providing an effective response for every challenge.

Some of Intel Custom Foundry announced customers include Achronix, Altera, Microsemi, Netronome, Panasonic and Tabula.

%d bloggers like this: