Archive

Archive for the ‘Dr. Chi Foon-Chan’ Category

Devices needing semicon on rise: Dr. Chi-foon Chan, Synopsys


Dr. Chi-Foon Chan, Synopsys.

Dr. Chi-Foon Chan, Synopsys.

According to Dr. Chi-Foon Chan, president and COO, Synopsys Inc., there are five reasons for the global semiconductor industry to be optimistic. These are:

* Devices that need semiconductors are on a rise. Eg: telecom — Apple iPad, tablet PC, etc. Everything requires semiconductors.
*  Digital media, growing downloads.
* Microprocessors.
*  Data storage.
* Networks.

Dr. Chan was delivering the keynote at last week’s Synopsys User Group (SNUG) India conference.

Key design challenges today include developing high performance chips with low power, design complexity, and shrinking design cycle. Some other challenges are:
*  SoC.
*  Exploding cost of verification.
* Smart and fast verification.
*  Challenges in advanced verification.
* IP and its re-use — power/performance, complexity, schedule.
*  Growth in IP business leading to high-quality IP.
*  Toward physics – TCAD.
*  Yield loss is a digital issue and is big money.

Synopsys’ Dr Chi-Foon Chan on India, low power design and solar

September 11, 2008 1 comment

There have been reports about the troubles within the EDA industry in recent times, especially those related with quarter sales. Interestingly, Synopsys has been the one sailing along fine! If that’s not enough, it made its intention known of playing a role on the solar/PV segment, an area where lot of investments have been happening!

Given this scenario, I was fortuitous enough, rather, extremely lucky to be able to get into a conversation with Dr. Chi-Foon Chan, President and Chief Operating Officer, Synopsys Inc., during his recent visit to India.

On the state of the global semiconductor industry, he said, it was somewhere now in the low 10s [well below 10 percent]. The EDA industry is currently tracking below that level. However, Synopsys has been growing at around 10 percent. He said, “The technology challenges today are very high.”

Synopsys has a substantial number of R&D population based out of India. Giving his assessment of the Indian semiconductor industry, Dr. Chan added: “Our main interest in India is largely talent and the academia. India can very well get more into the product development side. Even the outsourcing of designs have increased. Our capabilities, of the Indian team, have also increased.”

As with any good semiconductor ecosystem, the Indian industry also needs a proactive industry association, a role played to near perfection by the ISA (India Semiconductor Association). Acknowledging the ISA’s role, Dr. Chan said, “The ISA has also formed a very cohesive team.”

There is little doubt about India’s growing importance in technology strengths and managerial leadership. Dr. Chan added: “We are more on the high-end side and also track what others design. In India, the profiles of designs are definitely high-end in nature. This is largely due to the presence of a large number of MNCs. A very high percentage of designs are in the 45nm and 65nm process technology nodes.”

There is another significant indicator of India’s growing importance, and that is the huge rise in the attendance of the SNUG. In 2000, this event attracted 180 people. However, in 2008, the SNUG attracted over 2,000 people.

Moving India to next level
Given the very high level of commitment on Synopsys’ part toward India, there was a need to find out from Dr. Chan what exactly India needs to do to move to the next level in the value chain in the semiconductor ecosystem.

He advised: “India can do two to three things. One, for the system to grow, you need the government, academia and industry to grow together. India has all of the ingredients required to drive products.”

Comparing India with China, he highlighted the fact that while in China, the local consumption was higher than local supply, that was not the case with India!

“Therefore, looking at merely the local market is not the only thing. Products developed here can also be targeted at the Middle East and Southeast Asia.” He was quite forthright in his analysis, adding: “Industries start when you find markets. The skill sets are already present here. There can well be multiple startups.”

Dr. Chan also touched upon the fab vs. fabless issue, noting that there could well be more of fabless companies in India. “Building a fab requires lot of capital. Also, consolidation will continue to happen.”

What role does Dr. Chan see Synopsys playing in the Indian context? He said: “Synopsys will continue to be a catalyst for the industry. A healthy design industry in India continues to help us. We also work well with the Indian universities. Having more people from the universities will always help. We also invest a lot in application support. The application team also trains others. I now look forward to seeing more fabless companies here and India to become even more global.”

On low power design
India is also a centre of expertise in low power design, given that low power is hugely important in today’s electronics ecosystem. Dr. Chan commented that low power has always been the number one design issue. It cannot be taken care of at one single stage.

He added: “A slightly new concept that has emerged is low-power verification. There are so many schemes for attacking low power, such as multiple voltage islands. We (Synopsys) are spending a lot of effort in low power.

“As a designer, you require detailed analysis. Low-power verification is now coming up. Another area is testing. As an example, if so much power is required, how do you have the power cut from the tool you are using to test? From a Synopsys point of view, we are involved in several points, such as front-end synthesis, testing, sign-off, verification, etc. We are trying to put in a whole lot of methodologies.”

Synopsys in solar
EDA may be able to help by lowering power requirements and leakage on better products. Especially, the Synopsys’ TCAD product can be used to create more efficient and effective solar cells. Now, this is not a new development anymore. Synopsys, along with Magma, have already made known their intentions about setting foot in the solar/PV space.

On the TCAD, Dr. Chan said: “We have a very strong position in the TCAD, commercially. Now, it is one of our most critical elements in high-performance. Our TCAD is among the strongest in the EDA industry.

“In solar, it does not have to be a complicated place-and-route, etc. From an entire solar industry point of view, we have now used some effort from TCAD into this space. Heat transfer issues, etc., are more in the EDA space.”

I will continue my conversation with Synopsys on its solar initiative sometime later. Keep watching this space, folks

%d bloggers like this: