Archive

Archive for the ‘ROADM’ Category

Round-up 2013: Best of semiconductors, electronics and solar

December 31, 2013 Comments off

Virtex UltraScale device.

Virtex UltraScale device.

Friends, here’s a review of 2013! There have been the usual hits and misses, globally, while in India, the electronics and semiconductor industries really need to do a lot more! Enjoy, and here’s wishing everyone a Very Happy and Prosperous 2014! Be safe and stay safe!!

DEC. 2013
What does it take to create Silicon Valley!

How’s global semicon industry performing in sub-20nm era?

Xilinx announces 20nm All Programmable UltraSCALE portfolio

Dr. Wally Rhines: Watch out for 14/16nm technologies in 2014!

Outlook 2014: Xilinx bets big on 28nm

NOV. 2013
Indian electronics scenario still dull: Leaptech

Connecting intelligence today for connected world: ARM

India poses huge opportunity for DLP: TI

SEMICON Europa 2013: Where does Europe stand in 450mm path?

OCT. 2013
Apple’s done it again, wth iPad Air!

IEF 2013: New markets and opportunities in sub-20nm era!

SEPT. 2013
ST intros STM32F4 series high-performance Cortex-M4 MCUs

Great, India’s having fabs! But, is the tech choice right?

G450C

G450C

Now, India to have two semicon fabs!

Higher levels of abstraction growth area for EDA

AUG. 2013
Moore’s Law could come to an end within next decade: POET

What’s happening with 450mm: G450C update and status

300mm is the new 200mm!

JULY 2013
Xilinx tapes-out first UltraScale ASIC-class programmable architecture

JUNE 2013
EC’s goal: Reach 20 percent share in chip manufacturing by 2020!
Read more…

PMC’s DIGI 120G supports 10G, 40G and 100G speeds for OTN transport


PMC-Sierra Inc. has launched the PM5440 DIGI 120G, said to be the industry’s only single-chip OTN processor supporting 10G, 40G and 100G speeds for OTN transport.

Elaborating, Kevin So, senior product line manager, PMC, said: “PMC is the first to integrate support for 12x10G, 3x40G or 1x100G in a single piece of silicon to address OTN transport (point-to-point), OTN aggregation (multiplexing) and OTN switching deployments. For example, with DIGI 120G, an OEM can design a line card on a P-OTP that supports 12x10G supporting per port configurable multi-service like OC-192/STM-64, 10GE, OTU2 or Fiber Channel.”

Using the same chip and same software investment, they can also design a 3x40G card supporting 40GE, OC-768/STM-256 or OTU3. Another card can be designed to support 100GE or OTU4. An OEM can design 10+ cards across multiple platforms leveraging a single R&D investment using DIGI 120G. This also translates into the lowest cost of ownership for the OEMs, while achieving a time to market advantage.

How does OTN allow for flexible aggregation and switching from 1G to 100G? For that matter, what can this device do?

OTN is a defined as a carrier grade protocol to transparently carry and switch and aggregate multi-service traffic including 1GE all the way to 100GE over a WDM. The protocol is an ITU-T standard, and supports ODU0 (which is 1G) to ODU4 (which is 100G). In addition, OTN defines something called ODUflex, which is a flexible container that can be adjusted up and down from 1G to 100G in increments of 1G.

PMC’s DIGI 120G supports all these OTN container rates and enable the ability to multiplex and switch traffic between them. In addition, DIGI 120G provides the ability to scale ODUflex to carry packet traffic ranging from 1G to 100G without service interruption. DIGI 120G is a single chip solution that uniquely enables the transponders, muxponders and line cards on ROADMs and P-OTPs.

What are the innovations done by the PM5440 DIGI 120G? What if there is some new chip coming out?

Reducing line card power and bill-of-material by more than 50 percent, PMC’s DIGI 120G stands uniquely differentiated as:
* Industry’s only single-chip solution delivering 12x10G, 3x40G or 1x100G port densities.
* Industry’s highest number of 10G ports enabling 2x higher density 10G OTN line cards.
* Industry’s highest gain 40G/100G enhanced-FEC extending optical reach by 2x vs GFEC.
* Industry’s only 120G OTN solution with OIF’s OTN-over-Packet Fabric Protocol (OFP).
* First OTN processor to enable hitless packet traffic scaling with ITU-T’s G.hao/G.7044.
* Flexible per port client-mapping of OTN, Ethernet, Storage, IP/MPLS and SONET/SDH.
* Synchronous Ethernet (SyncE), 1588v2 Precision Time Protocol (PTP), and Ethernet Link OAM (802.3ah) delivering per port Carrier Ethernet performance.

To deliver these innovations, PMC integrated well over a billion transistors. The level of silicon integration is unprecedented – requiring engineering capabilities unmatched in the telecom industry. So added that PMC worked closely with tier-1 OEM customers from the start at the requirements phase in order to tailor the solution for their systems. As a result, the DIGI 120G is a key architectural element of their system.

By when does PMC sees enterprises ‘really’ going in for products with PM5440 DIGI 120G, to support Big Data? And, what happens if they still don’t?

So noted: “We have been working with our customers for the last few months developing their line cards using DIGI 120G. We are confident they will take their products using DIGI 120G to production in 2013.”

ROADM revolution
Does PMC actually see a reconfigurable optical add-drop multiplexer (ROADM) revolution?

According to So, a couple of things are happening in the ROADM market. On the photonics side, products are now available to allow service providers to deploy very flexible wavelength switches that are color independent, direction independent, wavelength contention-free and support flexible ITU grid widths.

On the platform architecture side, we are seeing a move away from traditional muxponders and transponders line card architectures where the client ports are fixed to a specific optical uplink port (wavelength). Instead, OEMs want to de-couple the client ports from the uplink optical capacity for great flexibility and in order to achieve better bandwidth utilization especially as the industry starts deploying 100G wavelengths.

Services in the network, especially those from the metro network edge is still largely 1G or 10G rates. To achieve this flexibility, central fabrics are added to the ROADM platform to support OTN switching. PMC’s Metro OTN processor family, including our latest DIGI 120G, enable OEMs to build line cards that can switch OTN and packet simultaneously in these platform architectures.

Finaly, is the bandwidth of common modulation format for 100G and beyond too broad for ROADMs?

Kevin So concluded: “OTN, as a protocol, is designed to scale to beyond 100G. The standard bodies are already working on this now. ROADMs, as a hardware platform will scale, but new components and technologies will likely be needed to take them beyond 100G.”

%d bloggers like this: