Archive

Archive for the ‘Spansion’ Category

300mm is the new 200mm!

August 14, 2013 Comments off

300mm fabs.

Buyers of 300mm fabs.

300mm is the new 200mm, said GlobalFoundries’ David Duke, during a presentation titled ‘Used Equipment Market’ at the recently held Semicon West 2013 in San Francisco, USA. Used semiconductor equipment sourcing and sales is a very interesting challenge.

Qimonda, Spansion, Powerchip and ProMOS had jumpstarted the market. Now, there is a broadening user base. There is an unexpected uptake by analog and power device producers to achieve economies of scale. There has been legacy logic scaling. Also, the 200mm fabs are being upgraded to 300mm with used equipment. Many 300mm tools can “bridge” to 200mm easily.

Parts tools are seeding the ecosystem. Third parties are also able to support refurb as well as tool moves. However, we need more! Software licensing is becoming a smaller hurdle. There has been no over-supply yet!

So, what are the ‘rough’ rules of thumb for 300mm? First, there are approximately 1,500 individual tools in the open market. Few sellers know the values as the market is still developing. Twenty percent of the transactions drive 80 percent of sales. Today, the number of 300mm buyers is around  1/10th the number of 200mm buyers!

Lithography has been the biggest difference. Leading edge DRAM is far more expensive in lithography. Lithography has seen the most dramatic financial effects with explosive pricing in technology (immersion) and the need for capacity (two-three critical passes vs. one with dual/triple gate patterning. As of now, financial shocks and bankruptcies are the main drivers for used 300mm.

Next, 200mm is now the new 150mm! The 200mm OEM support is starting to dry up. It is nearly impossible to compete in productivity vs. 300mm. Oversupply is causing values to stay suppressed. The only bright spot being: there is still strong demand for complete fabs. The 200mm market split is roughly by 40 percent Asia and 60 percent rest of the world.

So, what are the likely alternative markets for 200mm and 300mm fabs? These are said to be MEMs and TSV, LEDs and solar PV.

That brings me to India! What are they doing about fabs over here? This article has enough pointers as to what should be done. Otherwise, the world is already moving to 450mm fabs! Am I right?

Global semiconductor industry could well see revival in 2010?

February 6, 2009 1 comment

“Let’s start from the very beginning! A very good place to start!!”

Hope you all remember this lovely song sung by Julie Andrews in The Sound of Music!! So, what’s the connection?

Right! Last week, I blogged about how the global semiconductor industry is likely to drop by 28 percent in 2009, while the Indian industry should grow by 13.4 percent during the same period, and that, we should not get carried away by these statistics!

A moment to ponder: isn’t this drop of 28 percent too high for the global semicon industry? Or, is the situation really that bad? So, let’s start from the very beginning, and go straight to the source — Malcolm Penn!

Revival likely by 2010?
Here’s what Malcolm Penn, CEO and founder of Future Horizons, had to say: “Fraid not! It could even be lower, but remember that this is a year on year number. It is based on the following assumptions: Q4-08 down 22.5 percent vs. Q3-08; Q1-09 down 20 percent vs Q4-08; Q2 down 2 percent vs Q1; and Q3 up 12 percent vs Q2, and Q4 up 3 percent vs Q3! And, if this pattern runs true, 2010 will be up 28 percent vs 2009!”

Voila! The global semiconductor industry could well be in for a major revival next year itself! Why, even Bill McClean, president of IC Insights, took a more optimistic look at the state of the industry in light of the current global economic situation at the recently concluded SEMI ISS 2009 conference!!

Continues Penn, “The actual Q4 results (released this Sunday) were down 24.2 percent, slightly worse than our estimate.”

How to get the buzz back in semicon?
It has been said that the current situation the global semiconductor industry finds itself in was fueled by greed and short-term business goals. So, who were the culprits? Weren’t they warned earlier?

Adds Penn: “It was more complex that that! The woeful state-of-the-world economy was a consequence of debt, greed and irresponsibility; political self interests and short-term business goals, aided and abetted by compliant governments; ineffective regulators; imprudent institutions; incompetent management; irrational self delusion and vested self-interests! No one is blameless for this crisis! Concerns were raised, but the human nature is often irrational, and the ‘easy option’ always the one of choice.”

So true! Perhaps, the ‘easy option’ factor seems to be affecting the Indian semiconductor industry as well, but more of that later!

The key issue today is: what needs to be done to get the buzz back in the global semiconductor industry? The answer probably lies in the following: in the short-term, it involves rebuilding the industry confidence, and in longer term, it involves a radical return to ‘old fashioned’ business and political values.

On another note, I was curious to know how the EDA segment is doing? Penn said, “No better, no worse than normal, technology marches on, new designs accelerate in a downturn.”

Tricky memory!
Memory is another segment that’s been hit hard. In fact, the other day, someone asked me why Qimonda’s story was so important!

Another could not understand what Spansion really did, and why it had announced this January 15 that the company was exploring strategic alternatives for a sale or a merger! Doesn’t matter! Memory is a very tricky business, and semiconductors is the mother of all such tricky businesses! Perhaps, isn’t that why they once said in jest: “Real men have fabs!” Anyhow!

Coming back to memory, when can the industry expect some recovery in NAND? More importantly, will the various government interventions help? Qimonda also recently petitioned for the opening of the insolvency proceedings.

Penn is clear: “NAND will recover when the excess capacity abates, and that will take several more quarters. The government intervention won’t help, rather the opposite, and it will exacerbate the excess capacity issue.”

Fab spends to move up only by Q1-2010
Earlier, Penn predicted a recovery in 2010 with the resumption of growth in Q3 2009. What will make this happen? He says, “A recovering world GDP growth, plus a return in business confidence.”

However, those keen on fabs, do not expect the fab spends to look up any time soon! In fact, Penn estimates fab spends to start moving north not until Q1-2010 at the earliest.

The Chinese impact!
Interestingly, China is set to see negative growth of 5.8 percent during 2009. It will be worth noting how much of this this impact the global semiconductor industry.

Point one, compared to a global semicon fall of 28 percent in 2009, Penn considers a fall in China’s semicon fortunes of 5.8 percent to be ‘darned sight better!’ So, China should still be a high growth market (relatively speaking).

And India?
Like I mentioned earlier, the Indian semiconductor industry is perhaps getting affected by the ‘easy option.’ Design services continue to do well, hopefully, but when it comes to real semiconductor product companies, those are far and few.

And, I haven’t seen any real activity in the recent past that could tell me more such initiatives are in the pipeline. Nor do I think there are many attempts to even incubate such companies. On the contrary, there’s a mad rush toward solar!

No harm there! Solar is great for India and the need of the hour. However, India should not forget its semiconductor priorities as well! Indian simply cannot bank on chip design services and solar gains, and then proclaim that it has a very successful semiconductor industry! Real action is still quite far away.

I think, India needs to rethink its semiconductor strategy! It cannot survive on chip design alone.

“When you know the notes to sing, you can sing most anything,” concludes the song from The Sound of Music!

So, is the Indian semiconductor industry hitting the right notes? That’s going to be my next blog post, friends.

%d bloggers like this: