Archive

Posts Tagged ‘Analog Devices’

Are we about to reach end of Moore’s Law?


Here is the concluding part of my discussion with Sam Fuller, CTO, Analog Devices. We discussed the technology aspects of Moore’s Law and

Sam Fuller

Sam Fuller

‘More than Moore’, among other things.

Are we at the end of Moore’s Law?
First, I asked Fuller that as Gordon Moore suggested – are we about to reach the end of Moore’s Law? What will it mean for personal computing?

Fuller replied: “There is definitely still life left in Moore’s law, but we’re leaving the golden age after the wonderful ride that we have had for the last 40 years. We will continue to make chips denser, but it is becoming difficult to continue to improve the performance as well as lower the power and cost.

“Therefore, as Moore’s law goes forward, more innovation is required with each new generation. As we move from Planer CMOS to FinFET (a new technology for multi-gate architecture of transistors); from silicon to more advanced materials Moore’s law will still have life for the next decade, but we are definitely moving into its final stages.

“For personal computing, there is still a lot of innovation left before we begin to run out of ideas. There will continue to be great advances in smart phones, mobile computing and tablets because software applications are really just beginning to take advantage of the phenomenal power and capacity of today’s semiconductors. The whole concept of ‘Internet of things’ will also throw up plenty of new opportunities.

“As we put more and more sensors in our personal gadgets, in factories, in industries, in infrastructures, in hospitals, and in homes and in vehicles, it will open up a completely new set of applications. The huge amount of data generated out of these sensors and wirelessly connected to the Internet will feed into the big data and analytics. This would create a plethora of application innovations.”

What’s happening in the plane?
The plane opportunity – 90nm – 65nm – 45nm – 22nm – 20nm – 14/18nm – is starting to get difficult and probably won’t work at 12nm, for purely physics reasons. What is Analog Devices’ take on this?

Fuller said: “You are right! We have been going from 45 nm down to lower nodes, it’ll probably go down to 10 nm, but we are beginning to run into some fundamental physics issues here. After all, it’s a relatively finite number of atoms that make up the channels in these transistors. So, you’re going to have to look at innovations beyond simply going down to finer dimensions.

“There are FinFETS and other ways that can help move you into the third dimension. We’re getting to a point where we can put a lot of complexity and a number of functions on a single die. We have moved beyond purely digital design to having more analog and mixed signal components in the same chip. There are also options such as stacked dies and multiple dies.

“Beyond integration on a single chip, Analog Devices leads in advanced packaging technologies for System in a Package (SiP) where sensors, digital and analog/mixed signal components are all in a single package as the individual components would typically use different technology nodes and it might not be practical to do such integration on a single die.

“So, the challenge often gets described as “More than Moore”, which is going beyond Moore’s law, bringing those capabilities to do analog processing as well as digital and then integrating sensors for temperature sensing, pressure sensing, motion sensing and a whole range of sensors integrated for enabling the ‘Internet of Things’.

“At Analog Devices, we have the capability in analog as well as digital, and having worked for over 20 years on MEMS devices, we are particularly well positioned as we get into ‘More than Moore’.”
Read more…

%d bloggers like this: