Archive

Posts Tagged ‘rtl simulation’

Next wave of design challenges, and future growth of EDA: Dr. Wally Rhines

December 15, 2012 1 comment

Dr. Wally Rhines.

Dr. Wally Rhines.

Today, EDA requires specialization. Elaborating on EDA over the past decade, Dr. Walden (Wally) C. Rhines, chairman and CEO, of Mentor Graphics, and vice chairman of the EDA Consortium, USA, said that PCB design has been flat despite growth in analysis, DFM and new emerging markets. Front end design has seen growth from RF/analog design and simulation, and analysis As design methodologies mature, EDA expenditures stop growing. He was speaking at Mentor Graphics’ U2U (User2User) conference in Bangalore, India.

Most of the EDA revenue growth comes from major new design methodologies, such as ESL, DFM, analog-mixed signal and RF. PCB design trend continues to be flat, and includes license and maintenance. The IC layout verification market is pointing to a 2.1 percent CAGR at the end of 2011. The RTL simulation market has been growing at 1.3 percent CAGR for the last decade. The IC physical implementation market has been growing at 3,4 percent CAGR for the last decade.

Growth areas in EDA from 2000-2011 include DFM at 28 percent CAGR, formal verification at 12 percent, ESL at 11 pecent, and IC/ASIC analysis at 9 percent, respectively.

What will generate the next wave of electronic product design challenges, and the future growth of EDA? This would involve solving new problems that are not part of the traditional EDA, and ‘do what others don’t do!

Methodology changes that may change EDA
There are five factors that can make this happen. These are:
* Low power design beyond RTL (and even ESL).
* Functional verification beyond simulation.
* Physical verification beyond design for manufacturability.
* Design for test beyond compression.
* System design beyond PCBs

Low power design at higher levels
Power affects every design stage. Sometimes, designing for low power at system level is required. System level optimization has the biggest impact on power/performance. And, embedded software is a major point of leverage.

Embedded software has an increasing share of the design effort. Here, Mentor’s Nucleus power management framework is key. It has an unique API for power management, enables software engineers to optimize power consumption, and reduces lines of application code. Also, power aware design optimizes code efficiency.

Functional verification beyond RTL simulation
The Verification methodology standards war is over. UVM is expected to grow by 286 percent in the next 12 months. Mentor Graphics Questa inFact is the industry’s most advanced testbench automation solution. It enables Testbench re-use and accelerates time-to-coverage. Intelligent test bench facilitates linear transition to multi-processing.

Questa accelerates the hardware/software verification environment. In-circuit emulation has been evolving to virtual hardware acceleration and embedded software development. Offline debug increases development productivity. A four-hour on-emulator software debug session drops to 30 minutes batch run. The offline debug allows 150 software designers to jumpstart debug process on source code. Virtual stimulus increases the flexibility of the emulator. As an example, Veloce is 700x more efficient than large simulation farms.

Physical verification beyond design for manufacturability
The Calibre PERC is a new approach to circuit verification. The Calibre 3DSTACK is the verification flow for 3D.
Read more…

%d bloggers like this: